Ford Mustang Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1 (Edited)
I picked up a new Autometer Lunar nitrous gauge for my 2002 GT. Can anyone step me though the wiring? I figure the easiest way to power it is off the wiring running into the back of the stock gauge cluster. That way it will work with the dimmer headlight knob. Can anyone tell me which wire to tap into to get juice? Is there an easier/better way to install it to work with the dimmer? Thanks!

EDIT: I'm betting tapping right off the dimmer is a better solution. I recall someone on this board saying the brown wire was the one to pick. I'd prefer not to shave the insulation off the wire to check it. Can anyone confirm or deny it's the brown wire? Is it the dark brown or the light brown with the white stripe?
 

·
Registered
Joined
·
5 Posts
Discussion Starter #2
Bingo!

While the brown wire did the trick, the blue wire with the white stripe did it in style. Now the gauge works off the same dimmer as everything else in the car. The dash is in pieces until i put it back together in the morning, but the gauge looks great.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top