Ford Mustang Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
48 Posts
Discussion Starter #1
I was looking at getting some draglites. I want the 15x10's but what would be the best backspacing and offset. I believe the bolt pattern is 4x4.25 or 4x108mm. For a 93 LX 5.0. Right?
15x10 4x4.25 backspacing 5.5inch or
15x10 4x4.25 Backspacing 6.5inch offset 25mm. which would look the best?

For the front I was thinking of running 15x4 weld drag lites. which would be best?

15x4 4x4.25 backspacing 2.25in -6mm offset or
15x4 4x108mm backspacing 3.5in -13mm what do you think?
 

·
Registered
Joined
·
2,361 Posts
I would say go with a 6.5 in. backspacing in the back.
 

·
Registered
Joined
·
48 Posts
Discussion Starter #3
Will it work without rubbin? What size tires should I use? Would I be better off running 15x8's in the rear. Is it safe to run the skinny drag lites up front and do alot of street driving?

Sorry for all the questions but its things I need to know to make my choice on the rims and tires to fit the rims. Thanks for any info.

My car is drivin around often its not a soul drag car.
 

·
Registered
Joined
·
46,020 Posts
First, the 15 X 4 in front will still be able to be street driven with no problem but you obviously won't be a corner carver. Go with a 165 if you want the skinnies look, or go up to a 175.
For the rear, a 10 inch wide is probably going to be a tad large, you could go with the 8 inch with a 5 1/2 inch to 6 inch backspacing and be happy. With those, you could get a 275 tire which would be the biggest you could probably use.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top