Ford Mustang Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
138 Posts
Discussion Starter · #1 ·
Just installed a boost overlay in my dash cluster. Looks really good. Now I can see my guage go to up to 16 if my eyes can look at the guage and road at the same time. Ha. Plenty of wire for the two connectors but no vaccum hose lenght at all. I used a pair of finger clippers instead of dikes to snip the stud off the needle. It is tough to reconnect the hose back on but it can be done. Tight very tight. Or you can snip the hose and add lenght to it. I did not. I routed the hose under the bar and it gave me about 3 to 4 more inches without kinking the hose. Took me about an hour and a half. A couple of breaks and a beer or two.
 

·
Registered
Joined
·
21 Posts
Awesome, now let's see some pics.. I ordered a 16# hilton overlay when i was pullied @ 13 pounds, didn't get around to installing it. Now i'm @ 17lbs and it's useless...
 

·
Registered
Joined
·
138 Posts
Discussion Starter · #3 ·
boost overlay

dang 17 psi. cool, nope the 16 psi overlay won't help. It will most of the time, I'm sure your not in hard all the time are you. Ha.
 

Attachments

1 - 3 of 3 Posts
Status
Not open for further replies.
Top