Ford Mustang Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
I am installing a fresh 289 with and Edelbock Performer Intake and Carb. I have Headers and need to know how to set up vacuum for the Booster. I have power disk fronts. I would also know how the other vacuum lines go-ie. the transmission vacuum and PCV. I presume the PCV goes off the front of the carb like my other cars, but do I place the Booster vacuum off the back or off the manifold. And if it is the manifold, which side?

Thanks in advance.:tongue
 

·
Registered
Joined
·
9,198 Posts
Hello.:)On the performer intake there should be a plug screwed into it behind the carb towards the P/S.Remove that and install an appropriate fitting that will accomodate the vacuum lines from the booster and tranny.Hope that helps.:)
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top