Ford Mustang Forum banner

Broken Wheel Stud!

1141 Views 10 Replies 4 Participants Last post by  Ga-Pony
I have a 89 Stang, with the usual 4 lug drum brakes in the rear.... Well I was going to rotate my rear tires so I dont burn up the passenger side rear to quick.... well, on the second lug, I broke the lug and stud off completly!

I was just woundering if it is possible to driveit safely on three studs for a week untill I have the time and money to repair it?
Status
Not open for further replies.
1 - 4 of 11 Posts
Yeah it would be safe. Not 100% but as long as you dont get on it and thrash it you should be fine. My brothers 79 did the same thing and he drove around with 3 lug nuts for about 2 weeks. Just make sure the other 3 are tightened down properly.

Drew
It should be fine as long as you dont drive on it for a prolonged lperiod of time. I would not drive on it more than a week if it were me. Kind of like a donut tire. Drive on it long enough to get the other one fixed.

Drew
Okay Pita look at the first thread, stating if he can drive on it for a week UNTIL he could fix it HIMSELF. He was simply asking if he could drive the car with only 3 out of 4 studs holding the tire on. So before you go telling people to not listen to those who have actually done and learned through experience make sure you are 100% clear about what was asked.

Yes it needs to be fixed ASAP, but if it is his daily drivier and only means of transporation kind of hard to call into work to say that I have to fix my car. Makes one look unreliable. Thats exactly why I told him to baby it and not hammer it since it is on the rear wheel.

And lets see he stated " until i have the TIME and MONEY to fix it" SO there goes your ASAP theory out the window along with the theory of having someone else fix it.


Drew
See less See more
The wheel stud I bought a year ago cost me a couple bucks, the serpentine belt -- I am not sure how much i spent on that. Sorry, also sorry to here your car isnt working at the moment.
The stud isnt hard to replace, a hammer and a punch and you can get the broken one out. Installing the new one is just the reverse.


Good luck, let us know how it goes.


Drew
See less See more
1 - 4 of 11 Posts
Status
Not open for further replies.
Top