Ford Mustang Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter · #1 ·
Has anyone used factory bullet wheels with the mustang depot 5 lug slotted conversion rotor. I have a 1991 5.0 lx that I am finally getting around to converting it over. I went back through several posts with no mention of this. Any help would be great.
 

·
Registered
Joined
·
3,449 Posts
91hatch said:
Has anyone used factory bullet wheels with the mustang depot 5 lug slotted conversion rotor. I have a 1991 5.0 lx that I am finally getting around to converting it over. I went back through several posts with no mention of this. Any help would be great.
Most likely you will need to do an SN95 Brake Conversion to get any late model wheels to fit correct. The big snout that houses the wheel bearings in most set ups prevents you from being able to use the center caps. I put a link to a picture of my 92 GT with Factory Bullitt Wheels, sometimes it works and sometimes it doesnt.

http://www.corral.net/photopost/data/500/medium/Finished1.jpg
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top