Ford Mustang Forum banner
Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
i'm wanting to spice my engine up a bit so i picked up a set of GT40p heads a BBK SSI intake, would like some advice on a descent cam or should i stay stock. the bottom is still stock...
 

·
Registered
Joined
·
883 Posts
trickflow stage 1 or 2, check piston/valve clearance on stage 2. dont forget some people have had some issues with that intake manifold but there is a way to fix it.
 

·
Registered
Joined
·
46,010 Posts
Is smog legality a concern?
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #5 ·
trickflow stage 1 or 2, check piston/valve clearance on stage 2. dont forget some people have had some issues with that intake manifold but there is a way to fix it.

What issue's are you refering to? i've read of some fuel leaking problems but thats about it. There aren't any smog laws here yet but probably will be soon.
 

·
Registered
Joined
·
460 Posts
That the fuel rails leak and that they suck oil in the intake from the PCV. I would say the TFS 2 cam
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top