Ford Mustang Forum banner

cam choice o boy...

1186 Views 22 Replies 4 Participants Last post by  cindys_sn95
Send my build sheet into ed curtis today can't wait to see what he comes up with....

see what u guys give for specs..

brodix 5.0 r heads 1.6 rr

victor jr efi intake 90 mm elbow and throttle body

30 pound injectors and mass air meter

anderson power pipe full bolt ons..
1 - 2 of 23 Posts
what series are you going with? i went with the streetbeast series and ended up with .596/.574 and 230*/240* at .050". whatever you end up with you will be happy you dealt with Ed. After the first reply from him i emailed him back and he sent me a specs sheet.
what setup are u running?
all my specs are in my build thread a couple of threads down from this one.

edit: heres the link. my first post has pretty much everything listed as per the motor itself.
1 - 2 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.