Ford Mustang Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
sup dudes. Just upgraded my throttle body and intake. Went with a trick flow track heat upper and lower and got at 70mm bbk throttle body. Found a bbk cold air with a MAF with it for pretty cheap. But the maf is calibrated for 30s... And im not runnin 500+ hp so I don't need the bigger injectors.. So I'm sticking with the 19s. They're good for what... 500hp? But help me out guys! Can it be recalibrated or not. And if it can how do I do that?
 

·
Registered
Joined
·
2,747 Posts
You would need a tuner to account for that MAF calibration. I just went with a stock Ford 70mm unit that isn't "calibrated" and I am getting the SCT chip to make up for the 24lb injectors I don't really need.
 

·
Registered
Joined
·
2,747 Posts
What I also meant to add, if you go with a stock Ford 70mm MAF it does not need ANY calibration at all since the stock PCM is what Ford used to calibrate for injector size.
 
S

·
Guest
Joined
·
0 Posts
Please do not post tech related questions in the Introductions. Instead, please navigate to your year/platform specific page and post there.

Sean
 
1 - 5 of 5 Posts
Top