Ford Mustang Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter #1
:worshipi have a 1989 mustang gt 5.0 h.o engine that has spun a bearing i wanted to khow how hard an what steps are needed to convert a 1982 302 engine with after market roller cam an solid lifters can i use the 1989 302 efi parts to convert the 1982 into a fuel injected engine whats steps are needed can it even be done hope u guys can help thanks :wavey:worship
 

·
Registered
Joined
·
223 Posts
The EFI doesn't know if it's on a roller or flat tappet engine. You can make the swap, but, isn't the '82 engine a 28oz imbalance, where the '89 is a 50 oz imbalanced engine. Make sure the flywheel and all will work together. as far as adding the EFI to the older engine, yes.....you can do that.
 

·
Registered
Joined
·
17 Posts
Discussion Starter #3
thanks

i had a guy tell me the imbalance was the same as the 89 he said the 82 an 89 had the same 50oz balanace ill see if i can figure out if its the same thanks for the info it helps alot
 
1 - 3 of 3 Posts
Top