Ford Mustang Forum banner

Status
Not open for further replies.
1 - 7 of 7 Posts

·
Registered
Joined
·
58 Posts
Discussion Starter #1
I have at least $1000+ to spend on a decent pair of cylinder heads.
I am planning to only make UP TO 320WHP - the car is strictly street driven with rare runs on the strip.

I can't decide whether I should go for Edelbrock or FRPP. I want to squeeze the most out of the cylinder heads, but at the most affordable price. The vehicle will be naturally aspirated - no juice or forced induction.

I already own a 73MM Mafs, 65MM throttle body, 24lb injectors and a Cobra Intake Manifold.

What to do? What to buy?:headscratch:
 

·
Registered
Joined
·
46,010 Posts
Those Edelbrocks will be better than the Ford Racing heads anyway.
 

·
Registered
Joined
·
175 Posts
I got a stock 93 cobra with 6lbs of boost..My buddy had h/c/i the edelbrock 1.90 1.60 rpm heads and all the other bolt ons and he is honestly faster then me.. He installed those heads and that really woke that car up.. I would go with edelbrock, I have heard some issues with trick flow but i have no experience with them so.. Good luck
 

·
Registered
Joined
·
486 Posts
Lmfao, ebizzle.:hihi:
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top