Ford Mustang Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
173 Posts
Discussion Starter · #1 ·
Ok i need do change my front pads on my 98 v6 this weekend, but i dont know what tool i need to get the calipers off. It almost looks like large allen or hex head. Can any one please tell me what tool i need? Thanks.
 

·
Registered
Joined
·
1,871 Posts
we just use some vise grips, clamp down and turn. wait on a 98...Im not sure, could just try an allen key and see if that works.
 

·
Registered
Joined
·
2,579 Posts
All you need is a 12mm socket and a ratchet.
 

·
Registered
Joined
·
173 Posts
Discussion Starter · #4 ·
a 12mm socket and a ratchet? when i looked at the bolt on the caliper, i thought it looked like a round head with an indentation in it for a allen or hex wrench....the reason i ask is because i need to change my pads, and i dont have any tools at the appartment im in so i need to buy the tool and i dont wanna buy the wrong one.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top