[1993F250]

This car is startin to annoy me. Took my thermostat lower housing out and after reinstalling everything my check engine and wrench light are on. I'm not really sure what to do here?


93 F250 3k in rebuilt 460
04 Xterra on 33s-stock for now
2005 Mustang-stock for now

 

[mustangted1963]

codes? ?

 

[amustangrocks]

was the stat housing leaking? did you remove the tb when you did it? most often the wrench light is tb/fuel related, like a tps sensor, bad oring on the tb or loose, tb motor ect.

did you overheat the car? did you get the stat back in in the right direction, did you have the wrench light before you replaced the stat housing?

 

[1993F250]

I had to replace the tstat housing cuz it split open. I couldn't get the car anywhere to check codes cause of limp mode. I still don't know what brought on the engine light and wrench light but I reset the ECU and it all went back to normal.


93 F250 3k in rebuilt 460
04 Xterra on 33s-stock for now
2005 Mustang-stock for now

 

[quick2laddi]

thanks to mustangrocks's step by step install, i was able replace mine, so everything is good now?

 

[1993F250]

thanks to mustangrocks's step by step install, i was able replace mine, so everything is good now?

Yep everything is good. Had to replace the lower housing and sensor.


93 F250 3k in rebuilt 460
04 Xterra on 33s-stock for now
2005 Mustang-stock for now