Joined
·
251 Posts
So I data logged my 4.6 Cobra on my drive to work and now I have a few questions.
First time doing this so bare with me.
First off I'm using the SCT X3 hand held with the SCT data logging program on my laptop.
After about 10 minutes of logging all of a sudden my gauges all went flat for a second or two and then came back with no mechanical affects and then I looked down at my laptop and it said it was still logging but all lines were flat?
Also my bank 1 and bank 2 Long Term Fuel Trim (LTFT) vary greatly.
Bank 1 LTFT: minimum 0.9 maximum 70.39
Bank 2 LTFT: minimum 0.0 maximum 01.06
The Short Term Fuel Trim (STFT) are both close if not the same.
(Don't have those numbers off the top of my head)
Was this some sort of malfunction? I'll be logging on my way home as well for a second number. I will also be calling BAMA at AM when they open but I would like your thoughts as well.
First time doing this so bare with me.
First off I'm using the SCT X3 hand held with the SCT data logging program on my laptop.
After about 10 minutes of logging all of a sudden my gauges all went flat for a second or two and then came back with no mechanical affects and then I looked down at my laptop and it said it was still logging but all lines were flat?
Also my bank 1 and bank 2 Long Term Fuel Trim (LTFT) vary greatly.
Bank 1 LTFT: minimum 0.9 maximum 70.39
Bank 2 LTFT: minimum 0.0 maximum 01.06
The Short Term Fuel Trim (STFT) are both close if not the same.
(Don't have those numbers off the top of my head)
Was this some sort of malfunction? I'll be logging on my way home as well for a second number. I will also be calling BAMA at AM when they open but I would like your thoughts as well.