[Chris D]

I saw this link on another forum. Looks great, but wondering if anyone here has any experience with Dynavin. The head unit looks like it's factory installed. The surrounding trim is replaced which gives it the custom look.....way better than the double din Pioneer that I have installed.

(1) NEW! Dynavin N7-MST2005 PRO Radio Navigation System for Ford Mustang 2 – Dynavin North America

Wow, figured someone on this forum would have had one of these stereos/head units. I might be this first here….will keep y’all posted if I get one.

 

[huberoy123]

Looks like a nice unit. However, I would also like to see some reviews before I purchased it. Not a bad price compared to some of the other brands.

 

[crjackson]

Chris, I’m sorry no one has been able to offer up their experience with this unit. I’m still using my factory shaker Nav/Stereo, and it’s really kept me happy. Huberoy has a lot of experience and knowledge about audio equipment, so I’d follow his advice and seek reviews outside of AFM.

Perhaps my post will keep your thread at the top, and someone who hasn’t noticed it will respond with helpful input about that system. Good luck!

 

[Chris D]

I went ahead and pulled the trigger on the Dynavin after reading several posts on another forum. Supposed to arrive before Christmas. I'll post a review after it's installed.

Update:
Installed the new Dynavin head unit this weekend and I must say I’m very impressed. It looks like it’s factory installed…..large touchscreen, volume buttons that I can actually use, Bluetooth, Apple Car Play, navigation, etc. The instructions were a bit sketchy, but managed to get everything connected including aftermarket rear view camera and Shaker 500 subwoofer. Would highly recommend!

 

[huberoy123]

Looks good. Nice install.

 

[redpony72]

I saw this link on another forum. Looks great, but wondering if anyone here has any experience with Dynavin. The head unit looks like it's factory installed. The surrounding trim is replaced which gives it the custom look.....way better than the double din Pioneer that I have installed.

(1) NEW! Dynavin N7-MST2005 PRO Radio Navigation System for Ford Mustang 2 – Dynavin North America

I have the n7 pro in my 2010 Mustang. I like the system and the way it looks built-in.

 

[vgmstudios]

I am hoping someone could help me?
My car is a 06.
I recently bought the D8-MST2005 Pro and although it's great I'm having issues with the subwoofers. There is constant static coming out of them. I tried selecting on/off the Factory Amplifier HiFi nothing happens. I tried changing the subwoofer plug on the back to the white midi one but then they don't work. So I'm not sure what to do.

I also tried lowering the Subwoofer settings in the Bass-Middle-Treble settings, nothing changed.

Any one have something similar happen to them?

 

[Forddenial]

Check your stereo and amp ground. If possible, i'd ground the stereo yourself instead of relying on a factory wire if you installed it all correctly and have the hiss

 

[vgmstudios]

Check your stereo and amp ground. If possible, i'd ground the stereo yourself instead of relying on a factory wire if you installed it all correctly and have the hiss

You know I asked my brother and he said the exact same thing. I'm going to try this. Thank you very much for the response. Everywhere else I asked kept going on about other things that didn't make sense.

 

[robdneill]

Watch these videos!! How to correctly install without the humming.

 

[doasido123]

I had the same issue with subwoofers. You need a line level attenuator to reduce output to subwoofer amps. Reach out to tech support they will send you one free of charge.

 

[robdneill]

I put in the Dynavin 8 Pro today! It works really well and the stereo sound is greatly enhanced! More clear, better bump! VERY LOUD!
Watch the Doty video for wire connections for the N7! It might help a little.

This video helped me install the Dynavin 8:

I installed it with no Tech support. I will be finishing the rear camera aftermarket tomorrow.
This is the best rear camera installation video ever. Showed me most of what I need to do to run the wire, etc.

Dynavin provides the rear camera connections off the head unit with nice instructions on exactly which wires are used and not used. I purchased the license plate camera one.
Connect the RCA (Brown to Yellow, Red and Black). When you run the camera wire from the trunk, there is just the one black wire connection that houses the red, black and RCA wire. Very easy.

 

[WarriorsMustang17]

You know I asked my brother and he said the exact same thing. I'm going to try this. Thank you very much for the response. Everywhere else I asked kept going on about other things that didn't make sense.

Did you manage to fix the noise in the subs? I'm having the exact same issue

 

[robdneill]

I have no noise in the subs.

 

[WarriorsMustang17]

I have no noise in the subs.

Did you unplug that harness they show in the video? You unplugged the subwoofers. It gets rid of the noise but the subs don't work after that.

 

[robdneill]

Actually, I plugged in that smaller gray harness and used the Shaker Amplifier Integration Harness for the Dynavin 8 Pro. The sound is greatly enhanced.
I tried to take some pictures of the plugged in harnesses to the unit. See attached pictures.

 

[robdneill]

I followed the MST2010 Wiring Diagram that comes with the unit.

 

[regisdickson]

I went ahead and pulled the trigger on the Dynavin after reading several posts on another forum. Supposed to arrive before Christmas. I'll post a review after it's installed. Update: Installed the new Dynavin head unit this weekend and I must say I’m very impressed. It looks like it’s factory installed…..large touchscreen, volume buttons that I can actually use, Bluetooth, Apple Car Play, navigation, etc. The instructions were a bit sketchy, but managed to get everything connected including aftermarket rear view camera and Shaker 500 subwoofer. Would highly recommend! View attachment 783149

Hi I just recieved my unit and I'm having problems with static. When i used the amplified retention harness my volume is super low static is still there. When I unplug it the static is still there. It doesn't go away until I unplug the smallest harness but then my bass disappears. I'm not sure what else to do. Did you deal with this issue.

 

[Cobrajet67]

Hi I just recieved my unit and I'm having problems with static. When i used the amplified retention harness my volume is super low static is still there. When I unplug it the static is still there. It doesn't go away until I unplug the smallest harness but then my bass disappears. I'm not sure what else to do. Did you deal with this issue.

I would call Dynavin. They have excellent customer service.