Ford Mustang Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
264 Posts
Discussion Starter #1
Hello so I'm replacing my e-brake handle and was thinking to also replace the front cable that attaches to it at the same time. My question is can I use the adjustable front cable meant for the ford racing M-2300-K brake kit and adapt it into the the stock brake cable set up this way I could have the ability to adjust the e-brake cable or would I need to get a different T-bar thing from a SN95 or something for it to work? My rear breaks are all stock 4 lug drums BTW. picture of a stock cable and the ford racing adjustable cable I'm thinking i could install FRP adjustable cable into stock t-metal thing but not sure if the length is going to be correct or not anyone do this mod?
 

Attachments

·
Registered
Joined
·
656 Posts
The stock parking brake set up is self adjusting/non adjustable. No need to get that adjustable cable. If you want to replace the cable I suggest just getting an OEM replacement style cable.
 
1 - 3 of 3 Posts
Top