Ford Mustang Forum banner

Edelbrock Heads and Camshaft

1422 Views 15 Replies 3 Participants Last post by  67cpe
Hey all,

What would you estimate that I would gain by installing Edelbrock E-Street Heads (1.90" intake) and an XE268H cam. Engine is a 351w with a performer intake and a 600cfm carb and hooker headers.

1 - 1 of 16 Posts
I agree with the above!!!!!!!!!!!!!

Edelbrock is not bad stuff, but not real good either in terms of what you get for the $.
1 - 1 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.