Ford Mustang Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts
M

·
Guest
Joined
·
0 Posts
Discussion Starter #1
Hey guys I was looking at the egr and noticed that there isnt a pipe goin into it from the exhaust, it is just wires.. is that right or am i wrong?

If so can i just make a block off plate?
 
M

·
Guest
Joined
·
0 Posts
Discussion Starter #3
and that is all i need to do is make the block off plate.. leave the egr plugged in and everything??
 

·
Registered
Joined
·
1,241 Posts
i think its unplugged.

i dont know the "proper" way. but i havent had an egr valve since ive had the car, and the plug has just been laying there.
 
M

·
Guest
Joined
·
0 Posts
Discussion Starter #5
alright ill just have to try it and see what happens..
 

·
Registered
Joined
·
5,170 Posts
The EGR on Fox bodies are internal. It runs through the upper and lower intake, then into the EGR spacer. I'm pretty sure it will throw a CEL, but once the ECM recognizes that the EGR valve is not opening or closing, it automatically deletes its function. Meaning the ECM will not cycle the EGR valve. A block off plate is fine. Or you could block it off between the head and intake gasket surface, or between the upper and lower intake.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top