Glad to hear you resolved your issue, sounds like it was an easy fix. I`m still working on mine. I`ve made some progress by taking up some slack within the tranny cross member isolator.
There are a couple of TSB`s on that very subject, one suggests a hose clamp around the isolator and the other is to do away with the isolator altogether.
I`ve tried the clamp fix unsuccesfully. Others have had good results in removing the isolators as per the TSB.
I`m a little apprehensive in going that route as it would seem the entire exhaust system would only be supported by the cats and mufflers with nothing in between
, I could be wrong, anyone care to comment?
There are a couple of TSB`s on that very subject, one suggests a hose clamp around the isolator and the other is to do away with the isolator altogether.
I`ve tried the clamp fix unsuccesfully. Others have had good results in removing the isolators as per the TSB.
I`m a little apprehensive in going that route as it would seem the entire exhaust system would only be supported by the cats and mufflers with nothing in between
, I could be wrong, anyone care to comment?
