Ford Mustang Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
On the 64 1/2 im working on the front fenders were brazed on near the bottom. How should they attach?I see on recessed hole on the very underside of the fender where a screw goes into the lower cowl and where else? seems like there should be a bolt towards the front.I cant hold alignment between the fender bottom and the door with just one bolt.Am i missing something?
 

·
Registered
Joined
·
9,198 Posts
Hello.:)What the car had originally was one of those square thingies with the threaded hole in the middle of it.When that breaks loose people do all sorts of goofy stuff(like braze the fender to the car)instead of going ahead and tacking a new threaded thingy in there.You should see a hole there that is sort of square.Hope that helps.:)There's only one bolt on the very bottom of the fender,the one that goes in from the inside the door jamb near the top and the nut that goes on the stud sticking through behind the kick panel insise the car.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top