Ford Mustang Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
270 Posts
Discussion Starter #1
That's right. Ford Racing has delivered just what the 2011-2012 Coyote enthusiats were waiting for- a forged engine ready to drop in their Mustang that they can pour the boost to! This awesome engine is only $7699 from Modular Depot

Here's some information from Ford Racing on it.

Ford Racing's 5.0L Mustang "Aluminator" crate engine is a modern 5.0L 32-valve DOHC V-8 that uses advanced features like Twin Independent Variable Camshaft Timing (Ti-VCT) to deliver big power. Unlike the factory 5.0L engine, the "Aluminator" is built with low compression forged pistons and H-beam connecting rods to meet the demands of forced induction.

Fits 2011-2012 Mustang GT

5.0L (302 cubic inches)

9.5:1 low compression ratio (nominal)

Mahle Hard Anodized forged pistons with Graphal low friction coating

Manley H-beam connecting rods with ARP bolts

Boss 302 valve springs, part no: M-6513-M50BR, provides higher seat open
pressure for supercharged applications

Lightweight aluminum cylinder block, part no: M-6010-A50L4V, features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength

Piston-cooling jets, optimized oil drainback and windage control improve high-rpm performance

Large sump oil pan with 8qt capacity

Tuned composite intake manifold provides efficient air delivery and weight savings

80 mm single bore "drive by wire" throttlebody

Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction

Includes manual transmission engine harness and flywheel

Vehicle harness and PCM not included

Includes machined front cover for Ford Racing Supercharger FEAD system

Features colder, heat range 0 spark plugs for supercharging, part no: M-12405-M50

Includes Ford Racing oil filter, part no: M-6731-FL820

Use our NEW wiring, PCM and installation kit M-6017-A504V designed for street rod/project car installation.

Does not include alternator, for alternator kit see M-8600-M50ALT

Remote Mount Filter Adapter M-6881-M50 available for applications requiring oil filter relocation

Engine mount bosses and bellhousing mount pattern common to 4.6L modular engines.

NOTE: Due to 9.5:1 compression ratio, custom tuning is required for optimum performance

Shown with optional 5.0L Mustang engine cover kit, Part No: M-9680-M50



Call Chris at the number below to place your order.

Thanks!!
 

Attachments

1 - 1 of 1 Posts
Top