Ford Mustang Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I bought my son a 91 LX 5.0 with a 5 Speed for his first car. He wanted GT Ground effects so I found all the factory Ground effects. And I am in the process of putting them on to make sure they fit etc... before we take them off again to get ready for paint.

Does anyone have the correct locations for mounting the hardware? I have a picture but that does not give me the 100% Correct locations.

Here is our project.
 

Attachments

·
Registered
Joined
·
4,119 Posts
You mentioned you found and have all the GT ground effects, curiosity did you get the mounting hardware also?
If not you'll need these 10 pieces so that you can to mount the ground effect.
Fox Mustang Restoration :: Products

Hopefully this is some help with the mounting locations for those thin metal strips for the ground effects.
 

·
Registered
Joined
·
13,166 Posts
I just held mine in place marked and then drilled the holes for the brackets. I had to do this when I used LX fenders on my GT.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #4
You mentioned you found and have all the GT ground effects, curiosity did you get the mounting hardware also?
If not you'll need these 10 pieces so that you can to mount the ground effect.
Fox Mustang Restoration :: Products

Hopefully this is some help with the mounting locations for those thin metal strips for the ground effects.
Yes I have the hardware just not the mounting locations:)

Thanks for the help :bigthumbsup
 
1 - 4 of 4 Posts
Top