[konatown]

Just wondering if I should be concerned about having my rear gears swapped after 35K miles on 2.73's? Is there any reason to avoid drivetrain mods due to mileage?
Also, does anyone know of a good gear shop in Central Illinois?
Thanks

 

[Maxwellmurder]

There is no reason to worry about modding your drivetrain because of mileage. You'll be upgrading a higher mileage part for a 0 mile part. I did gears at around 30000 miles and a new driveshaft at about 43000 miles.


Sent from AutoGuide.com App

 

[chadjones99]

I just changed out 2.73 for 3.31 on 2012 with 15k miles
car drive a lot better , had it done in south WI.
Kenosha

 

[BBBad65]

Nope you don't have to worry. A "lower" gear doesn't need any upgrades in terms of drive terrain. Just swapped out 3.73s for my now 4.11s (teeth were worn). And even that little bit made a huge difference in my acceleration. No doubt you'll love the upgrade.


Sent from AutoGuide.com App

 

[konatown]

just to be sure... I also have to get the "rear gear pinion bearing" for 11-14 V6, in addition to the install kit, Right?

 

[<3_3.7]

I got mine done at 30,000 miles and the installer said I didn't need anything extra. Only if I had like 100,000 miles would he need the additional kit.

 

[Maxwellmurder]

im pretty sure he kit that I got came with that. The install kit on AM comes with a high torque GT500 pinion bearing

http://www.americanmuscle.com/frpp-88-pinion-kit-8614v8.html


Sent from AutoGuide.com App