Ford Mustang Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
151 Posts
Discussion Starter #1
Just got the svo fired up and sounds like a champ but the problem i'm having is the tach and fuel gauge do not work. I have about 6 gallons of gas in the tank so it should read something. And as for the tach I pulled the instrument cluster out some and all the connections are in tightly and I looked underneeth the dash by all the pedals and and above the steering column but I see nothing that appears to be loose or disconnected.
 

·
Registered
Joined
·
102 Posts
are you getting voltage At the fuel gauge?

As for the tach. Does the needle move at all or is it completely non-functional?
 

·
Registered
Joined
·
151 Posts
Discussion Starter #3
Not sure, how woukd I go about testing it for voltage? I have a volt meter.
The tach doesn't budge at all.
 

·
Registered
Joined
·
151 Posts
Discussion Starter #5
I don't have a fuse layout cause the owners manual is missing 10 pages with the fuse layout5 being one and my haynes manual doesn't give one so if you have one that'd be great!
 

·
Registered
Joined
·
151 Posts
Discussion Starter #6
Found a layout and that slot was missing its fuse so put one in and tah works perfectly! But still the fuel gauge doesn't work and the fuse layout I found doesn't show a fuse for the fuel gauge. If it even does take one
 
1 - 6 of 6 Posts
Top