Ford Mustang Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
49 Posts
Discussion Starter #1
Hi there
Recently i ve fixed the heater hoses under the intake manifold .
After my mechanic findhed and put everything in place the engine was eorking well,but when i left the shop for a short ride for refueling the engine stall and since then the engine is dead ,and only cranks but not starting.
The mechanic says there is spark and fuel. There is not check engine light nor any fault code.he says all 8 injectors needs to be change as well as my fuel pump.
Since im in dispute with him ,a good advise is needed here.
The engine keeps flooding but no start.
I have 62 mm ford preformance throttle body ,long tube headers,jlt 3 series cai ,brendspeed tune, 91 octane fuel.
So what is it?


Sent from my Mi Note 10 using Tapatalk
 

·
Registered
Joined
·
9,445 Posts
my first SWAG* is a tune issue, if it is actually flooding

* SWAG is American slang acronym for "silly wild assed guess"
 

·
Registered
Joined
·
164 Posts
my first SWAG* is a tune issue, if it is actually flooding

* SWAG is American slang acronym for "silly wild assed guess"
Thank you for explaining that.... seen it used but no clue what it meant
 

·
Registered
Joined
·
2,925 Posts
Possibly something was not put back together right. Maybe fuel rail related.
Your mechanic sounds like a crook!!
Check all your hose connections and electric connections to your injectors.
 
  • Like
Reactions: crjackson

·
Registered
Joined
·
3,506 Posts
Possibly something was not put back together right. Maybe fuel rail related.
Your mechanic sounds like a crook!!
Check all your hose connections and electric connections to your injectors.
I'm inclined to agree.
I'd also add that if the car was behaving normally before the work was done, the tune can't possibly be at fault.
I suggest you retrace your steps by removing the intake manifold again.
 
1 - 5 of 5 Posts
Top