Ford Mustang Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hey guys,
I recently bought an 05 v6 convertible as a small project. I took out the driver side door panel and replaced it with the GT door panels along with lower speakers/amp. I plugged in the speaker and tested it just by turning on the radio...nothing. Looked at
some fuse diagrams and everything seems to be in place. Any advice?
 

·
Registered
Joined
·
1,275 Posts
Any speculation over the web amounts to guess work, but at the most basic level have you confirmed the start-up command from the head unit to the Shaker woofer amps (should be about 6 V)? Have you ohmed everything out to confirm connections? Have you ohmed the woofers to make sure the voice coils aren’t fused (should be around 1 ohm). The two voice coils on the woofers also have to be phased properly or their fields will cancel and you won’t get anything. Tons of other possibilities too …
 
1 - 2 of 2 Posts
Top