Ford Mustang Forum banner

Gt500 throttle body fit?

4282 Views 10 Replies 3 Participants Last post by  platinum08
Anyone know which years gt500 tb will bolt up to a 08 4.6?

Sent from my SCH-R930 using AutoGuide.Com Free App
1 - 7 of 11 Posts
Maybe that is a dumb question.... Looking at the stock 500 tb it looks the same as mine. So i guess a better question is are the 500's tb different than the stock gt.

Sent from my SCH-R930 using AutoGuide.Com Free App
Ok... I might just put a 62mm bbk i have on instead

Sent from my SCH-R930 using AutoGuide.Com Free App
I think i saw adapters for the gt500 to fit on the gt. Ill have to look at it again

Sent from my SCH-R930 using AutoGuide.Com Free App
What is the point where it will benefit?. Part of this is bc when i did my install and switched tb i noticed while holding it that the stock didn't seem to return very well when i opened it... Wasn't sure if that's just how the stock operated or maybe a weak spring.. But while idling if u rev it up it doesn't return to return reg rpm as it use to. And again could be bc i was use to the bbk or my stock isn't working proper. Rather then buy another stock thought i would check out the bbk that's just sitting in a box

Sent from my SCH-R930 using AutoGuide.Com Free App
I just need to get it figured out b4 the dyno

Sent from my SCH-R930 using AutoGuide.Com Free App
Ok... 500 at the fw?

Sent from my SCH-R930 using AutoGuide.Com Free App
1 - 7 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top