Ford Mustang Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
370 Posts
Discussion Starter #1
So ive finally got the time to install the heads cam and intake i bought. Ive got a few questions before i dive in.. first off when i remove the cam will i need to remove the radiator also? And another question i have is when i install the cam isntere a.certain position it should be in? Because if im right and you dont put it in in the wrong position wont the lobes be.opening at the wrong time? And if his is true.how do u no which way it goes?
Thanks guys!
 

·
Registered
Joined
·
575 Posts
you will need to remove the radiator. and the cam itself will slide in, be very careful putting it in. as far for positioning, there should be a dole pin with your timing gear that will help you with alignment. you'll need to degree the cam. there's the easy less accurate way by going dot to dot on the crank and cam gear, or you can manually degree it. do some searches to find the process. i'm sure someone else will chime in also.
 
1 - 2 of 2 Posts
Top