[summer]

Hello all,
Can you tell me how to remove the shift lever to replace the oil seal behind it? Is it pressed on or must I take down the pan to release something? My factory and Haynes manuals don't go into enough detail.
Thanks in advance,

'72 302 convertible

 

[davido30093]

You are going to need to drop the pan and remove the Nut from the inside.

 

[Putt]

Pictures!!

C4 pictures <----click the link and scroll down to post number 6 for picture links on the seals and linkage. :winks

 

[summer]

Thanks for the reply, the info you guys give is invaluable and very generous. It turns out that the outer "O"ring was the culprit and needed a washer to hold it in place.

Thanks again

 

[Putt]

Glad to help, the o-ring is an easier fix, that's for sure!!!