Ford Mustang Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
I have an 88' GT and a 94' GT. I am parting out the 94' and want to convert my car to the 5-lug. What do i exactly need from that car to mine in order to do this. I obviously know the axles but curious if the splines are different and I can just take the axles out and swap them into my diff. in my fox?
 

·
Registered
Joined
·
109 Posts
Look at the stickies at the top. The one that's titled 79-93 five lug disc conversion or something similar is the one you want.

Good luck
 

·
Registered
Joined
·
195 Posts
Easiest and most complete way:
-Use the spindles, calipers & rotors from the '94
-Get a '93 Cobra master cylinder & adjustable proportioning valve
-Swap the whole rear-end over.

Of course there are little things in between, but this is the way I did mine, it was fairly easy.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top