[dugannsport]

Thanks to creaky first of all for his help with 2 previous issues. I just put in a new Rebelwire harness that doesn't include the wiper switch to wiper motor harness. I used the original but now have nothing. Isn't there supposed to be a ground wire coming off the motor? I do see a flat male spade terminal on the motor with nothing connected to it. Is this for the ground wire? Thanks in advance for any help.

 

[Veronica]

Hello. There is an orange wire with a white stripe that is part of the underdash harness that plugs into a short orange/white wire that is sticking out of the connector that plugs into the wiper switch. That wire is what brings power to whole system. Does your replacement harness have something that serves that purpose?

 

[dugannsport]

Hi Veronica. I do have a wire that brings power to the switch. But nothing beyond there. What is that one spade terminal that has a sort of protective cover over it?

 

[Driveway]

You most likely have a single speed motor and switch. That covered terminal on the motor is the ground. There should be a white wire (#95) that plugs into it, it splices into a ground terminal and then continues to the switch. In most of the diagrams I have the single speed stuff is on the right-middle and next to the wire code box. The 2-speed stuff is at the bottom left.