Ford Mustang Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
107 Posts
Discussion Starter · #1 ·
When i purchased my car it came with a BBK cold air intake. I have been wanting to clean the cone I just dont know how to get to it with this intake. Can anyone explain or have a link to where it shows it.

Thanks
 

·
Registered
Joined
·
20 Posts
You have to do it from under the car. There should be enough space for you to reach up into the fender with a ratchet and back the clamp off so you can slide it out of there. You can find the installation instructions at BBK: Performance Parts but I didn't see any pics... The easy part is getting it off... wait til you have to put it back on!
 

·
Registered
Joined
·
1,955 Posts
its easier to put on with someone else up top to hold things from moving.
 

·
Registered
Joined
·
235 Posts
You should be able to remove the fender well and get to it pretty easy. If you don't want to do that jack the car up, put it on stands, and you should be able to get to it pretty easy.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top