Ford Mustang Forum banner

Help With Cold Air Intake(Sensors)

1258 Views 7 Replies 3 Participants Last post by  Smokey_Toke
:headscratch:Alrighty whats up yalls another new but old guy i been on here before so yea throttlebody to intake box black tube to silencer to mass ariflow unit the other little senser have no idea what it does(Please tell if you know)and filter box i have intake plastic tubing but nothing i do will make my car run/idle i have the exact same lenght tubing i tried cuting it down to size smaller filter senser tube rehooked on different sensers please help it seems reletively simple on a civic just on my 92 lx notchback its being a B so please help and were can i find a clutch release fork lever for this borgwarner stock trans(T5?) and where i can find the stock parts installed by ford
Status
Not open for further replies.
1 - 2 of 2 Posts
your post confused the hell outa me but i belive the other lil sensor near the intake box is the Intake Air Temprature Sensor (iat) it sends a signal to the computer on how much air is being sucked in the engine. thus the system backs it up with fuel. this is my understanding. welcome to the site man hope you find everything you need.

edit: i find decent priced stock parts at Direct Ford Parts Genuine Ford Truck Parts Lincoln Mercury Parts OEM Ford Parts and Accessories there prices definatly beat the dealers by like 30%
it should be simple if you folow the directions on your kit. just put everything where it looks like it belongs and where it fits and shows in your directions. 1 problem people have while installing aftermarket air intakes is the MAF meter. your car wont run right if this is installed improperly. theres a (arrow) > on your mass air flow meter that shows wich way the air is flowing. make sure it's pointing towards the throttle body (upwards) and everything should fit/work just peachy
1 - 2 of 2 Posts
Status
Not open for further replies.
Top