Ford Mustang Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
I have a '96 GT that I bought about a year ago. It has an aftermarket switch on it that you have to cycle for about ten seconds otherwise the engine will not turn over. I want to get rid of this switch and get things back to a more oem condition. The switch is in a fairly heavy gauge yellow wire that goes to the remote keyless entry control box. I've jumped the switch and that didn't fix anything. The switch is located between the remote keyless entry box and a 20AMP inline fuse. I really need some input on this issue. Thank You
 

·
Registered
Joined
·
2,244 Posts
If you can still get in touch, with the guy or gal you bought the car from. I would ask who installed it, and get in touch with him, Mike. SCT Tuner. :bigthumbsup:bigthumbsup
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #3 ·
I don't think the guy I bought it from put the switch in, I think it was one of the people that had it before him.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top