Ford Mustang Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
how do I replace the belt tensioner? I have taken the belt off and the bearing in the tensioner pulley is shot...you evidently must pull off the tensioner to replace the pulley.
 

·
Registered
Joined
·
7,401 Posts
It depends on which tensioner you have, the single bolt or the 3 bolt, but it's an assembly that just unbolts and pulls off, there's no real trick to it.
 

·
Registered
Joined
·
406 Posts
yeah if its the 1 bolt like most of them all you do is lossen the bolt and the thing comes right off. its on there REAL tight. i disconnected that lil AC unit thing to the left to gain clearance for a breaker bar and and than it was a cake walk. changing that thing felt like it gave me more HP than the CAI or TB combined lol . the old one would scrape against the chain cover and squeak hardcore when it was wet out. and didnt hold tension when i gassed it. best "mod" yet
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top