Ford Mustang Forum banner

I need supercharger help

814 Views 5 Replies 4 Participants Last post by  grn 00 gt
Hi everyone I have a saleen seriese1 supercharger I believe it's a m90 with the lower intake I want to no if other superchargers will bolt rite onto the intake and work also how much boost and horse power can i get out of the of the m90 Ive read the articles online but I would like personal experiences with the supercharger all help is apreciated
Status
Not open for further replies.
1 - 6 of 6 Posts
if you are going with a positive displacement supercharger (saleen, eaton, kenne bell, whipple, roush etc) they have the intake manifold integrated in them. if you are going centrifugal then you are going to have to keep the stock intake manifold or go with an aftermarket piece.
I already have the intake and supercharger I want to no if any other supercharger will bolt onto my saleen intake thanks for helping
hi i have a series one too want to get some extra horses use a smaller pully and have it ported there is no other s/c that will bolt on to it i know this because my went bad and i try to find another s/c that would fit but nothing if you get the pully dont get it to small because can over spin the s/c and damage it chanesport sell one specially for the series 1
See less See more
That suks! But o well I quess il just use the seriese 1 thanks and what.kinda numbers did u make with the seriese 1
I have a Saleen Series IV and if I remember correctly, the Series I, II and IV all use the same intake with the exception of the adapter plate that bolts to the intake and the 1.6L Lysholm twinscrew blower I have. :bigthumbsup The Lysholm is capable of 400 whp with mods on a stock motor or even more with a built motor, heads and cam. Evil_GT has the same setup as I do and is putting out around 430 whp and 500 whp with a 50 shot of NOS. :D
See less See more
1 - 6 of 6 Posts
Status
Not open for further replies.
Top