Ford Mustang Forum banner

Installiation of windshield wiper lines in a 1968 coupe

4345 Views 3 Replies 3 Participants Last post by  Warrior 2011
I need to replace the rubber lines for the windshield wipers in my 1968 coupe. I have all of the parts but i have to clue where the lines run. Can someone help me out?
Status
Not open for further replies.
1 - 4 of 4 Posts
The hose runs from the Windshield Washer Tank along the contour of the shock tower to a two connection grommet just above where the wiring harness goes through the firewall and down to the pedal operated pump near your high beam switch. It may be easier to remove the pump to see what you are doing. From the pedal pump, the hose goes back through the same grommet and over to the nozzles attached to the forward section of the cowl.
See less See more
Here a couple of pictures that might help.

Attachments

See less See more
2
Thanks hopefully i will get this done this weekend.:bigthumbsup
1 - 4 of 4 Posts
Status
Not open for further replies.
Top