Ford Mustang Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
393 Posts
Discussion Starter #1
i have a few questions about installing 1.6 rockers for pedestal mount heads, i checked the rod length and all, and am using 1.6 rockers,i was told totighten the rocker down while spinning the pushrod till it stops spinning, then give it one more half turn, when i do this the rocker begins the push the spring down a little bit, Is this normal?
 

·
Registered
Joined
·
6,328 Posts
i have a few questions about installing 1.6 rockers for pedestal mount heads, i checked the rod length and all, and am using 1.6 rockers,i was told totighten the rocker down while spinning the pushrod till it stops spinning, then give it one more half turn, when i do this the rocker begins the push the spring down a little bit, Is this normal?
no...thats how you install stud mount rockers,not pedestal..

heres the proper way to install pedestal mount..you need a tq wrench,and make sure the lifter is on the base circle of the cam :
http://static.summitracing.com/global/images/instructions/non-adjustable%20rocker%20instructions0909.pdf
 
1 - 3 of 3 Posts
Top