Ford Mustang Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
249 Posts
Discussion Starter · #1 ·
I was following klrstangs thread on his KB blower where he had issues with an air lock in his intercooler and realized I recently installed a larger intercooler collection tank, and in doing so drained the system. I drove the car today and after 20 minutes the coolant was not even warm in the tank. I opened the tank and could not tell if the coolant was circulating. I can hear the pump come on when I turn the key on. So what is the easiest way to get the pump primed and/or the air bubble out?
 

·
Registered
Joined
·
249 Posts
Discussion Starter · #2 ·
Okay so that was easy. Started taking the coolant line off of the side of the pump and heard the air escaping then soon followed by the coolant. Buttoned things up turned on the key and I had movement in the tank which means I have flow through the system again. Thanks to klrstangs thread or I wouldn't have noticed or thought of the problem.
 

·
Registered
Joined
·
249 Posts
Discussion Starter · #7 ·
Thanks again. This kind of dialogue is what makes this site excellent.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top