Ford Mustang Forum banner
Status
Not open for further replies.

Is there an oil breather cap for the S197 4.6?

2K views 12 replies 6 participants last post by  toorbeenee 
G
#1 ·
Just like the tittle says, I've never seen one yet. I just wanted to know if there is one, or ever was one.
 
#11 ·
What I did was, put a plug on the intake and run a hose off the valve cover (drivers side) with a breather on the end. No more breathing hot air with oily vapors.
 
#12 ·
jdm and metco both make aftermarket 1's ......mepersonally i went to advance auto parts and just bought some small blue 1's for like 9 a piece n capped of the intake but here are the part#s for another setup , which you can get from jegs, summit ect. for around 40 bucks total

3/8" K&N Breather (Passenger side) 62-1320*
5/8" K&N Breather (Driver's side) 62-1340
3/8" Vacuum Cap (C&L Intake Tube) 660-1698 NAPA
5/8" Vacuum Cap (Saleen S/C) 660-1696 NAPA
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top