Ford Mustang Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
251 Posts
Discussion Starter #1
I purchased a used JBA o/r hpipe for cheap but it doesn't have the hardware. I called JBA but they keep sending me in circles to different people. Does anyone here know the nut/bolt specs? also, do you think some cut-it-yourself gasket with some dabs of liquid gasket will work ok?
 

·
Banned
Joined
·
12,435 Posts
you want real donut gaskets and new nuts/bolts otherwise it will leak...not sure how you can run that thing in CA
 

·
Registered
Joined
·
251 Posts
Discussion Starter #3 (Edited)
Switch it out for a day every 2 years. The better gas mileage and 10 horsies. Is worth it to me. And as for pollution wise... one big rig pollutes 15-20 times what my car does. and that's if i drove it daily. I only drive it a few miles a week.
Thanks for the info on the gasket. I got all new nuts/bolts/washers. Any idea where I could get a donut gasket?
also, for anyone who is wondering. the bolts are 3/8x2.5 and you get the 3/8 washers/nuts that fit. after looking at it the sizes should work for all mid pipes.
 
1 - 3 of 3 Posts
Top