Ford Mustang Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
144 Posts
:D Just did this about a month ago. The front eye bolts are going to be a bear, usually. One of mine came right out, but the other took 7 sawzall blades to get out. Just put stands under the frame, raise the jack up to the pumpkin to where it's just touching, and start unbolting the u-bolts. I would give them ALL a good bath in some penatrating oil/spray about 24 hours before, and they should break loose fairly easy. Once the u-bolts are off, you can raise the whole rear end up out of the way, then take the shakles loose, and let the leafs touch the ground. Then comes the fun, but maybe both of yours will come out easy.:thumbsup LUCK!
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top