[BKid]

I need to get some line locks . I had to replace my rear breaks do to power breaking at the drag way.
Any recommendations would be greatly appreciated.:bigthumbsup

 

[fobra559]

Here is a nice step by step of how to install line locks and gives you the list of what you need. Hope this helps.

S197 Ford Mustang PMP Line Lock Kit Install - Ford Mustang | StangNet.com

 

[kenneth]

You must have been doing some serious braking to use up the brakes that fast.
+1 on the PMP kit it's one of the better ones for our cars.

 

[BKid]

You must have been doing some serious braking to use up the brakes that fast.
+1 on the PMP kit it's one of the better ones for our cars.

Yea I was lighting them up.A real smoke show.I was looking at the slp that brenspeed is selling. I will check out the PmP`S.

 

[bigwilly43729]

I have the SLP kit. Very easy install, although I did mangle the factory brake line when I removed it. Hope I won't be needing that anytime soon.

Hopefully I can get a road test today. Car is still down for repairs.

 

[BKid]

I have the SLP kit. Very easy install, although I mangled the factory brake line when I removed it. Hope I won't be needing that anytime soon.

Hopefully I can get a road test today. Car is still down for repairs.

What is wrong with it?

 

[bigwilly43729]

What is wrong with it?

I'm installing a bunch of crap, but it's taking me forever between work, school and honey-do lists. I have the driveshaft in and am working on the safety loop in a few minutes. I'm hoping to get the sending unit for the tranny cooler placed and install the k-member brace & torque limiters tonight as well. I won't be able to test the line locks because they aren't powered up yet; I'm going to do all the wiring for power when I install the gauges and just do it all at once.

Modding is stressful!! :shigrin

 

[BKid]

Maybe 1 at a time, except the parts that can be done at the same time.

 

[BKid]

The slp that brenspeed sells is it a single solenoid line lock ? I can not tell.

 

[Troon2004]

I have the SLP and it's specifically made for the '05 and up models whereas with the PMP you have to buy a couple of solenoids too (at least as I recall).

$156.00 @ JEGS

SLP M25001 - SLP Mustang Brake-Control Package - JEGS

OR $139.00 @ LMR

05-06 BRAKE CONTROL KIT MUSTANG

07-08 BRAKE CONTROL KIT MUSTANG

:shiny:

 

[BKid]

Brenspeed is 139.00 shipped. I am just not sure if it is a single solenoid, which is what I want.

 

[Troon2004]

The ones from SLP are.