Ford Mustang Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
While tracking down a no brake light, turn signals, hazards issue (turned out to be a fuse) I managed to create a new problem for myself.

I removed the ignition cylinder so that I could take the top cover off the steering column and when I went to button things back up tonight the ignition cylinder is now giving me problems. When I switch it to run, I have weak dash lights, weak headlights, no turn signals or brake lights… and the car won’t start. When you rotate the key back it turns to fat back and triggers accessory power with the same issues. The fan sometimes kicks on and other random stuff.

Advice would be much appreciated.
 

·
Super Moderator
Joined
·
4,437 Posts
Hmm, sounds like something Yadkin might be able to help with.
 

·
Registered
Joined
·
6,852 Posts
Sounds like you have an incomplete ground at the switch. Check/ clean/ tighten all the connections.
 
1 - 3 of 3 Posts
Top