Ford Mustang Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

· Registered
Joined
·
989 Posts
if you apply some heat with a hair dryer and work the bubbles out with a credit card that would work but when you put them on you should have sprayed a soapy water solution on the light and the front and back of the yellow cover so you could have worked out a lot of the bubbles then.
 

· Registered
Joined
·
989 Posts
Dry? thats weird if it is a decal it should be put on like one. I have one other thing for you. If people in your area smoke out lights see if they will do a yellow for you they can do that just as easy as the grey. Good luck! :bigthumbsup
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top