Ford Mustang Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
83 Posts
Discussion Starter #1
I got pre-painted louvers from americanmuscle.com and no matter how much 3M tape i put on it the bottom part always seems to come unstuck. Not to the point where its near falling off but it makes me uncomfortable and i am always looking back seeing if they are still on ha... but i would like to know if anyone has has this happen to them and i would like to know how you fixed the problem. THANKS!
 

·
Registered
Joined
·
1,022 Posts
I would use some very fine sanding paper and sand just enough to put a haze on the paint (not to fully penetrate the clearcoat because you dont want to hurt your paint) on the areas that are to be taped make sure all the wax is off of the paint with some naptha and use some 3m adhesion promoter and that sucker wont budge for years! :bigthumbsup
 

·
Registered
Joined
·
1,580 Posts
i would do the same thing as IansBAJ
just enough to make it look like its scuffed
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top