Mass air conversion?? Need the pigtail

2385 Views 6 Replies 4 Participants Last post by johnnymg, Jul 9, 2013

Paul in LKY

Discussion Starter · Oct 21, 2012

Okay I have the motorsport mass kit conversion kit. Got it dirt cheap. But I need the pigtail that goes from the ECM to the mass air. Any ideas or can I just make one or what? If I can order it I will, but I can't find it anywhere. The ECM has the plug coming out of it kinna looks like a o2 plug so you don't have to slpice into the wires, but he didn't have the plug from the ECM to the mass air. HELP!!

Save

1 - 2 of 7 Posts

johnnymg

· #4 · Jul 9, 2013

I have the same dilema, I bought the adapter piece in a deal with a c3w I have the MAF plug with wires for a conversion, I found that a O2 sensor plug will fit by cutting off one of the lugs, I figured the four pins out on the Motorsport plug with a VOM/ My question is does anyone have the instruction for the Motorsport unit. What else do I need to do to complete the conversion? Thanks for any help

John

Save

johnnymg

· #7 · Jul 9, 2013

Thank You for the instruction sheet, now I just have to finish making the maf harness, was going to try to pull the pins fron the O2 plug, but I think I will just solder and shrink wrap the connections to the O2 plug wires.

thanks again

John

Save

1 - 2 of 7 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month