Ford Mustang Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

· Registered
Joined
·
73 Posts
Im with GhostDog, I love my Canton pan. I used all Canton parts and got them here http://www.mspmall.com/ddautospec/ The guy is very knowledgable and helpful. I just put the windage tray on and it fit fine. There was also no problem with fitment in the car. Not sure if you could snake it in with the engine in the car. Mine is an older model, but it is 7 quarts, T sump, build in crank scraper and baffling for oil control, and it came with its own pickup if I remember correct. It also has a spot to mount a level/temp sensor if you like. I have heard of fitment problems with other makes of pans, mostly with interferance between the pan and pickup.
 

· Registered
Joined
·
73 Posts
I have the Melling HV pump listed above and have had no problem with it. Not sure of HP loss, but always have good pressure (40 psi hot @ 2500 rpms). Thats my own 2 cents.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top