Ford Mustang Forum banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
202 Posts
Discussion Starter · #1 ·
I am looking into A/R Shelby Torq Thrust M wheels and would like a stagered look, deeper set spokes on the rears than the fronts. I am going 18X9 and 18X10. They come in

9" 34mm offset 6.34" backspace
9" 24mm offset 5.94 back space

10" 24mm offset 5.94 backspace
10" 34mm offset 6.34" backspace

I think I need the 9's with the 34mm offset and the 10's with the 24mm offset to get the look I want.

Any wheel guys out there that can help me?

Mark
 

·
Registered
Joined
·
858 Posts
24mm with 10" wheelswould Stick out A LOT!!!

I have 26mm with 9" wheelsoffset and it sticks out past the fender

Remember, Lower the offset number the more they stick out.
 

Attachments

·
Registered
Joined
·
858 Posts
I dont think so meng, my rear wheels are only 9" with a 26mm offset and they stick out farther than those.

Personally i think the stick out look is nice but with the 10" you may run into fender rubbing issues if you lowered or turning hard.
 

·
Registered
Joined
·
202 Posts
Discussion Starter · #5 ·
That is what i do not get about the offset. It may also have to do with the backspace numbers. The wheels in the photo are 18x10 with 24mm offset but the back space is way different than your 9's. he has no rub problems and the car is lowered an inch or so. Here is another car with 10's and Nitto 305/45 Drag Radials. His do not rub either.
 

Attachments

1 - 5 of 5 Posts
Status
Not open for further replies.
Top