[BK2BLKGT]

Got a pair of koni sports coming in and thinking about the eibach pros and either steeds HD or MM mounts. Any issues I could possibly run into with either of these? Do I need isolators for either?

Ordering these today, just stuck on this decision lol

 

[Mustang/Canuck]

You need the isolators for the Steeda HD Mounts for sure...

 

[Guest]

The Steeda HD mounts require an isolator from the 2010 upper mounts, and I believe the GT500 mounts DO NOT fit this requirement. The Maximum Motorsports CC plates should work with no other parts required.

My opinions on lowering a car err on the "do it right the first time" side instead of doing the least possible to make it work. With that said, an adjustable panhard bar, adjustable rear lower control arms, and rear LCA relocating brackets, should also be on your list.

Also an alignment is required, don't cheap out here.

Strano Performance Parts - Part Details

Strano Performance Parts - Part Details

Strano Performance Parts - Part Details

 

[BK2BLKGT]

Already have a bmr bar with h&r super sports but I've decided to change them out since my ride is too ruff. I plan on upper and lowers too and as always an alignment the gt500 mounts are under 100, I didn't know if this would work or not.

Thanks guys.

 

[Guest]

The GT500 mounts have been serving me well for about 6,000 miles. Sitting right at -1.5 degrees front camber with caster perfectly within specs.

 

[BK2BLKGT]

Thanks Grim, do i also need to buy new bolts?